mirrors / kong--kong

项目文件夹

kong--kong
文件
main
T
wehub-resource-sync d158540472 chore: import upstream snapshot with attribution
2026-07-13 12:32:21 +08:00

2294 行
137 KiB
Plaintext
原始文件 永久链接 Blame 文件历史

# -----------------------
# Kong configuration file
# -----------------------
#
# The commented-out settings shown in this file represent the default values.
#
# This file is read when `kong start` or `kong prepare` are used. Kong
# generates the Nginx configuration with the settings specified in this file.
#
# All environment variables prefixed with `KONG_` and capitalized will override
# the settings specified in this file.
# Example:
# `log_level` setting -> `KONG_LOG_LEVEL` env variable
#
# Boolean values can be specified as `on`/`off` or `true`/`false`.
# Lists must be specified as comma-separated strings.
#
# All comments in this file can be removed safely, including the
# commented-out properties.
# You can verify the integrity of your settings with `kong check <conf>`.
#------------------------------------------------------------------------------
# GENERAL
#------------------------------------------------------------------------------
#prefix = /usr/local/kong/ # Working directory. Equivalent to Nginx's
# prefix path, containing temporary files
# and logs.
# Each Kong process must have a separate
# working directory.
#log_level = notice # Log level of the Nginx server. Logs are
# found at `<prefix>/logs/error.log`.
# See http://nginx.org/en/docs/ngx_core_module.html#error_log for a list
# of accepted values.
#proxy_access_log = logs/access.log # Path for proxy port request access
# logs. Set this value to `off` to
# disable logging proxy requests.
# If this value is a relative path,
# it will be placed under the
# `prefix` location.
#proxy_error_log = logs/error.log # Path for proxy port request error logs.
# The granularity of these logs is adjusted by the `log_level` property.
#proxy_stream_access_log = logs/access.log basic # Path for TCP streams proxy port access logs.
# Set to `off` to disable logging proxy requests.
# If this value is a relative path, it will be placed under the `prefix` location.
# `basic` is defined as `'$remote_addr [$time_local] '
# '$protocol $status $bytes_sent $bytes_received '
# '$session_time'`
#proxy_stream_error_log = logs/error.log # Path for tcp streams proxy port request error
# logs. The granularity of these logs
# is adjusted by the `log_level`
# property.
#admin_access_log = logs/admin_access.log # Path for Admin API request access logs.
# If hybrid mode is enabled and the current node is set
# to be the control plane, then the connection requests
# from data planes are also written to this file with
# server name "kong_cluster_listener".
#
# Set this value to `off` to disable logging Admin API requests.
# If this value is a relative path, it will be placed under the `prefix` location.
#admin_error_log = logs/error.log # Path for Admin API request error logs.
# The granularity of these logs is adjusted by the `log_level` property.
#status_access_log = off # Path for Status API request access logs.
# The default value of `off` implies that logging for this API
# is disabled by default.
# If this value is a relative path, it will be placed under the `prefix` location.
#status_error_log = logs/status_error.log # Path for Status API request error logs.
# The granularity of these logs is adjusted by the `log_level` property.
#vaults = bundled # Comma-separated list of vaults this node should load.
# By default, all the bundled vaults are enabled.
#
# The specified name(s) will be substituted as
# such in the Lua namespace:
# `kong.vaults.{name}.*`.
#opentelemetry_tracing = off # Deprecated: use `tracing_instrumentations` instead.
#tracing_instrumentations = off # Comma-separated list of tracing instrumentations this node should load.
# By default, no instrumentations are enabled.
#
# Valid values for this setting are:
#
# - `off`: do not enable instrumentations.
# - `request`: only enable request-level instrumentations.
# - `all`: enable all the following instrumentations.
# - `db_query`: trace database queries.
# - `dns_query`: trace DNS queries.
# - `router`: trace router execution, including router rebuilding.
# - `http_client`: trace OpenResty HTTP client requests.
# - `balancer`: trace balancer retries.
# - `plugin_rewrite`: trace plugin iterator execution with rewrite phase.
# - `plugin_access`: trace plugin iterator execution with access phase.
# - `plugin_header_filter`: trace plugin iterator execution with header_filter phase.
#
# **Note:** In the current implementation, tracing instrumentations are not enabled in stream mode.
#opentelemetry_tracing_sampling_rate = 1.0 # Deprecated: use `tracing_sampling_rate` instead.
#tracing_sampling_rate = 0.01 # Tracing instrumentation sampling rate.
# Tracer samples a fixed percentage of all spans
# following the sampling rate.
#
# Example: `0.25`, this accounts for 25% of all traces.
#plugins = bundled # Comma-separated list of plugins this node should load.
# By default, only plugins bundled in official distributions
# are loaded via the `bundled` keyword.
#
# Loading a plugin does not enable it by default, but only
# instructs Kong to load its source code and allows
# configuration via the various related Admin API endpoints.
#
# The specified name(s) will be substituted as such in the
# Lua namespace: `kong.plugins.{name}.*`.
#
# When the `off` keyword is specified as the only value,
# no plugins will be loaded.
#
# `bundled` and plugin names can be mixed together, as the
# following examples suggest:
#
# - `plugins = bundled,custom-auth,custom-log`
# will include the bundled plugins plus two custom ones.
# - `plugins = custom-auth,custom-log` will
# *only* include the `custom-auth` and `custom-log` plugins.
# - `plugins = off` will not include any plugins.
#
# **Note:** Kong will not start if some plugins were previously
# configured (i.e. have rows in the database) and are not
# specified in this list. Before disabling a plugin, ensure
# all instances of it are removed before restarting Kong.
#
# **Note:** Limiting the amount of available plugins can
# improve P99 latency when experiencing LRU churning in the
# database cache (i.e. when the configured `mem_cache_size`) is full.
#dedicated_config_processing = on # Enables or disables a special worker
# process for configuration processing. This process
# increases memory usage a little bit while
# allowing to reduce latencies by moving some
# background tasks, such as CP/DP connection
# handling, to an additional worker process specific
# to handling these background tasks.
# Currently this has effect only on data planes.
#pluginserver_names = # Comma-separated list of names for pluginserver
# processes. The actual names are used for
# log messages and to relate the actual settings.
#pluginserver_XXX_socket = <prefix>/<XXX>.socket # Path to the unix socket
# used by the <XXX> pluginserver.
#pluginserver_XXX_start_cmd = /usr/local/bin/<XXX> # Full command (including
# any needed arguments) to
# start the <XXX>
# pluginserver.
#pluginserver_XXX_query_cmd = /usr/local/bin/query_<XXX> # Full command to "query" the
# <XXX> pluginserver. Should
# produce a JSON with the
# dump info of the plugin it
# manages.
#port_maps = # With this configuration parameter, you can
# let Kong Gateway know the port from
# which the packets are forwarded to it. This
# is fairly common when running Kong in a
# containerized or virtualized environment.
# For example, `port_maps=80:8000, 443:8443`
# instructs Kong that the port 80 is mapped
# to 8000 (and the port 443 to 8443), where
# 8000 and 8443 are the ports that Kong is
# listening to.
#
# This parameter helps Kong set a proper
# forwarded upstream HTTP request header or to
# get the proper forwarded port with the Kong PDK
# (in case other means determining it has
# failed). It changes routing by a destination
# port to route by a port from which packets
# are forwarded to Kong, and similarly it
# changes the default plugin log serializer to
# use the port according to this mapping
# instead of reporting the port Kong is
# listening to.
#anonymous_reports = on # Send anonymous usage data such as error
# stack traces to help improve Kong.
#proxy_server = # Proxy server defined as an encoded URL. Kong will only
# use this option if a component is explicitly configured
# to use a proxy.
#proxy_server_ssl_verify = off # Toggles server certificate verification if
# `proxy_server` is in HTTPS.
# See the `lua_ssl_trusted_certificate`
# setting to specify a certificate authority.
#error_template_html = # Path to the custom html error template to
# override the default html kong error
# template.
#
# The template may contain up to two `%s`
# placeholders. The first one will expand to
# the error message. The second one will
# expand to the request ID. Both placeholders
# are optional, but recommended.
# Adding more than two placeholders will
# result in a runtime error when trying to
# render the template:
# ```
# <html>
# <body>
# <h1>My custom error template</h1>
# <p>error: %s</p>
# <p>request_id: %s</p>
# </body>
# </html>
# ```
#error_template_json = # Path to the custom json error template to
# override the default json kong error
# template.
#
# Similarly to `error_template_html`, the
# template may contain up to two `%s`
# placeholders for the error message and the
# request ID respectively.
#error_template_xml = # Path to the custom xml error template to
# override the default xml kong error template
#
# Similarly to `error_template_html`, the
# template may contain up to two `%s`
# placeholders for the error message and the
# request ID respectively.
#error_template_plain = # Path to the custom plain error template to
# override the default plain kong error
# template
#
# Similarly to `error_template_html`, the
# template may contain up to two `%s`
# placeholders for the error message and the
# request ID respectively.
#------------------------------------------------------------------------------
# HYBRID MODE
#------------------------------------------------------------------------------
#role = traditional # Use this setting to enable hybrid mode,
# This allows running some Kong nodes in a
# control plane role with a database and
# have them deliver configuration updates
# to other nodes running to DB-less running in
# a data plane role.
#
# Valid values for this setting are:
#
# - `traditional`: do not use hybrid mode.
# - `control_plane`: this node runs in a
# control plane role. It can use a database
# and will deliver configuration updates
# to data plane nodes.
# - `data_plane`: this is a data plane node.
# It runs DB-less and receives configuration
# updates from a control plane node.
#cluster_mtls = shared # Sets the verification method between nodes of the cluster.
#
# Valid values for this setting are:
#
# - `shared`: use a shared certificate/key pair specified with
# the `cluster_cert` and `cluster_cert_key` settings.
# Note that CP and DP nodes must present the same certificate
# to establish mTLS connections.
# - `pki`: use `cluster_ca_cert`, `cluster_server_name`, and
# `cluster_cert` for verification. These are different
# certificates for each DP node, but issued by a cluster-wide
# common CA certificate: `cluster_ca_cert`.
# - `pki_check_cn`: similar to `pki` but additionally checks
# for the common name of the data plane certificate specified
# in `cluster_allowed_common_names`.
#cluster_cert = # Cluster certificate to use
# when establishing secure communication
# between control and data plane nodes.
# You can use the `kong hybrid` command to
# generate the certificate/key pair.
# Under `shared` mode, it must be the same
# for all nodes. Under `pki` mode it
# should be a different certificate for each
# DP node.
#
# The certificate can be configured on this
# property with either of the following values:
# * absolute path to the certificate
# * certificate content
# * base64 encoded certificate content
#cluster_cert_key = # Cluster certificate key to
# use when establishing secure communication
# between control and data plane nodes.
# You can use the `kong hybrid` command to
# generate the certificate/key pair.
# Under `shared` mode, it must be the same
# for all nodes. Under `pki` mode it
# should be a different certificate for each
# DP node.
#
# The certificate key can be configured on this
# property with either of the following values:
# - absolute path to the certificate key
# - certificate key content
# - base64 encoded certificate key content
#cluster_ca_cert = # The trusted CA certificate file in PEM format used for:
# - Control plane to verify data plane's certificate
# - Data plane to verify control plane's certificate
#
# Required on data plane if `cluster_mtls` is set to `pki`.
# If the control plane certificate is issued by a well-known CA,
# set `lua_ssl_trusted_certificate=system` on the data plane and leave this field empty.
#
# This field is ignored if `cluster_mtls` is set to `shared`.
#
# The certificate can be configured on this property with any of the following values:
# - absolute path to the certificate
# - certificate content
# - base64 encoded certificate content
#------------------------------------------------------------------------------
# HYBRID MODE DATA PLANE
#------------------------------------------------------------------------------
#cluster_server_name = # The server name used in the SNI of the TLS
# connection from a DP node to a CP node.
# Must match the Common Name (CN) or Subject
# Alternative Name (SAN) found in the CP
# certificate.
# If `cluster_mtls` is set to
# `shared`, this setting is ignored and
# `kong_clustering` is used.
#cluster_control_plane = # To be used by data plane nodes only:
# address of the control plane node from which
# configuration updates will be fetched,
# in `host:port` format.
#cluster_max_payload = 16777216
# This sets the maximum compressed payload size allowed
# to be sent across from CP to DP in Hybrid mode
# Default is 16MB - 16 * 1024 * 1024.
#cluster_dp_labels = # Comma-separated list of labels for the data plane.
# Labels are key-value pairs that provide additional
# context information for each DP.
# Each label must be configured as a string in the
# format `key:value`.
#
# Labels are only compatible with hybrid mode
# deployments with Kong Konnect (SaaS).
# This configuration doesn't work with
# self-hosted deployments.
#
# Keys and values follow the AIP standards:
# https://kong-aip.netlify.app/aip/129/
#
# Example:
# `deployment:mycloud,region:us-east-1`
#------------------------------------------------------------------------------
# HYBRID MODE CONTROL PLANE
#------------------------------------------------------------------------------
#cluster_listen = 0.0.0.0:8005
# Comma-separated list of addresses and ports on
# which the cluster control plane server should listen
# for data plane connections.
# The cluster communication port of the control plane
# must be accessible by all the data planes
# within the same cluster. This port is mTLS protected
# to ensure end-to-end security and integrity.
#
# This setting has no effect if `role` is not set to
# `control_plane`.
#
# Connections made to this endpoint are logged
# to the same location as Admin API access logs.
# See `admin_access_log` config description for more
# information.
#cluster_data_plane_purge_delay = 1209600
# How many seconds must pass from the time a DP node
# becomes offline to the time its entry gets removed
# from the database, as returned by the
# /clustering/data-planes Admin API endpoint.
#
# This is to prevent the cluster data plane table from
# growing indefinitely. The default is set to
# 14 days. That is, if the CP hasn't heard from a DP for
# 14 days, its entry will be removed.
#cluster_ocsp = off
# Whether to check for revocation status of DP
# certificates using OCSP (Online Certificate Status Protocol).
# If enabled, the DP certificate should contain the
# "Certificate Authority Information Access" extension
# and the OCSP method with URI of which the OCSP responder
# can be reached from CP.
#
# OCSP checks are only performed on CP nodes, it has no
# effect on DP nodes.
#
# Valid values for this setting are:
#
# - `on`: OCSP revocation check is enabled and DP
# must pass the check in order to establish
# connection with CP.
# - `off`: OCSP revocation check is disabled.
# - `optional`: OCSP revocation check will be attempted,
# however, if the required extension is not
# found inside DP-provided certificate
# or communication with the OCSP responder
# failed, then DP is still allowed through.
#cluster_use_proxy = off
# Whether to turn on HTTP CONNECT proxy support for
# hybrid mode connections. `proxy_server` will be used
# for hybrid mode connections if this option is turned on.
#------------------------------------------------------------------------------
# NGINX
#------------------------------------------------------------------------------
#proxy_listen = 0.0.0.0:8000 reuseport backlog=16384, 0.0.0.0:8443 http2 ssl reuseport backlog=16384
# Comma-separated list of addresses and ports on
# which the proxy server should listen for
# HTTP/HTTPS traffic.
# The proxy server is the public entry point of Kong,
# which proxies traffic from your consumers to your
# backend services. This value accepts IPv4, IPv6, and
# hostnames.
#
# Some suffixes can be specified for each pair:
#
# - `ssl` will require that all connections made
# through a particular address/port be made with TLS
# enabled.
# - `http2` will allow for clients to open HTTP/2
# connections to Kong's proxy server.
# - `proxy_protocol` will enable usage of the
# PROXY protocol for a given address/port.
# - `deferred` instructs to use a deferred accept on
# Linux (the `TCP_DEFER_ACCEPT` socket option).
# - `bind` instructs to make a separate bind() call
# for a given address:port pair.
# - `reuseport` instructs to create an individual
# listening socket for each worker process,
# allowing the kernel to better distribute incoming
# connections between worker processes.
# - `backlog=N` sets the maximum length for the queue
# of pending TCP connections. This number should
# not be too small to prevent clients
# seeing "Connection refused" errors when connecting to
# a busy Kong instance.
# **Note:** On Linux, this value is limited by the
# setting of the `net.core.somaxconn` kernel parameter.
# In order for the larger `backlog` set here to take
# effect, it is necessary to raise
# `net.core.somaxconn` at the same time to match or
# exceed the `backlog` number set.
# - `ipv6only=on|off` specifies whether an IPv6 socket listening
# on a wildcard address [::] will accept only IPv6
# connections or both IPv6 and IPv4 connections.
# - `so_keepalive=on|off|[keepidle]:[keepintvl]:[keepcnt]`
# configures the `TCP keepalive` behavior for the listening
# socket. If this parameter is omitted, the operating
# system’s settings will be in effect for the socket. If it
# is set to the value `on`, the `SO_KEEPALIVE` option is turned
# on for the socket. If it is set to the value `off`, the
# `SO_KEEPALIVE` option is turned off for the socket. Some
# operating systems support setting of TCP keepalive parameters
# on a per-socket basis using the `TCP_KEEPIDLE`,` TCP_KEEPINTVL`,
# and `TCP_KEEPCNT` socket options.
#
# This value can be set to `off`, thus disabling
# the HTTP/HTTPS proxy port for this node.
# If `stream_listen` is also set to `off`, this enables
# control plane mode for this node
# (in which all traffic proxying capabilities are
# disabled). This node can then be used only to
# configure a cluster of Kong
# nodes connected to the same datastore.
#
# Example:
# `proxy_listen = 0.0.0.0:443 ssl, 0.0.0.0:444 http2 ssl`
#
# See http://nginx.org/en/docs/http/ngx_http_core_module.html#listen
# for a description of the accepted formats for this
# and other `*_listen` values.
#
# See https://www.nginx.com/resources/admin-guide/proxy-protocol/
# for more details about the `proxy_protocol`
# parameter.
#
# Not all `*_listen` values accept all formats
# specified in nginx's documentation.
#stream_listen = off
# Comma-separated list of addresses and ports on
# which the stream mode should listen.
#
# This value accepts IPv4, IPv6, and hostnames.
# Some suffixes can be specified for each pair:
# - `ssl` will require that all connections made
# through a particular address/port be made with TLS
# enabled.
# - `proxy_protocol` will enable usage of the
# PROXY protocol for a given address/port.
# - `bind` instructs to make a separate bind() call
# for a given address:port pair.
# - `reuseport` instructs to create an individual
# listening socket for each worker process,
# allowing the kernel to better distribute incoming
# connections between worker processes.
# - `backlog=N` sets the maximum length for the queue
# of pending TCP connections. This number should
# not be too small to prevent clients
# seeing "Connection refused" errors when connecting to
# a busy Kong instance.
# **Note:** On Linux, this value is limited by the
# setting of the `net.core.somaxconn` kernel parameter.
# In order for the larger `backlog` set here to take
# effect, it is necessary to raise
# `net.core.somaxconn` at the same time to match or
# exceed the `backlog` number set.
# - `ipv6only=on|off` specifies whether an IPv6 socket listening
# on a wildcard address [::] will accept only IPv6
# connections or both IPv6 and IPv4 connections.
# - `so_keepalive=on|off|[keepidle]:[keepintvl]:[keepcnt]`
# configures the `TCP keepalive` behavior for the listening
# socket. If this parameter is omitted, the operating
# system’s settings will be in effect for the socket. If it
# is set to the value `on`, the `SO_KEEPALIVE` option is turned
# on for the socket. If it is set to the value `off`, the
# `SO_KEEPALIVE` option is turned off for the socket. Some
# operating systems support setting of TCP keepalive parameters
# on a per-socket basis using the` TCP_KEEPIDLE`, `TCP_KEEPINTVL`,
# and `TCP_KEEPCNT` socket options.
#
# Examples:
#
# ```
# stream_listen = 127.0.0.1:7000 reuseport backlog=16384
# stream_listen = 0.0.0.0:989 reuseport backlog=65536, 0.0.0.0:20
# stream_listen = [::1]:1234 backlog=16384
# ```
#
# By default, this value is set to `off`, thus
# disabling the stream proxy port for this node.
# See http://nginx.org/en/docs/stream/ngx_stream_core_module.html#listen
# for a description of the formats that Kong might accept in stream_listen.
#admin_listen = 127.0.0.1:8001 reuseport backlog=16384, 127.0.0.1:8444 http2 ssl reuseport backlog=16384
# Comma-separated list of addresses and ports on
# which the Admin interface should listen.
# The Admin interface is the API allowing you to
# configure and manage Kong.
# Access to this interface should be *restricted*
# to Kong administrators *only*. This value accepts
# IPv4, IPv6, and hostnames.
#
# It is highly recommended to avoid exposing the Admin API to public
# interfaces, by using values such as `0.0.0.0:8001`
#
# See https://docs.konghq.com/gateway/latest/production/running-kong/secure-admin-api/
# for more information about how to secure your Admin API.
#
# Some suffixes can be specified for each pair:
#
# - `ssl` will require that all connections made
# through a particular address/port be made with TLS
# enabled.
# - `http2` will allow for clients to open HTTP/2
# connections to Kong's proxy server.
# - `proxy_protocol` will enable usage of the
# PROXY protocol for a given address/port.
# - `deferred` instructs to use a deferred accept on
# Linux (the `TCP_DEFER_ACCEPT` socket option).
# - `bind` instructs to make a separate bind() call
# for a given address:port pair.
# - `reuseport` instructs to create an individual
# listening socket for each worker process,
# allowing the Kernel to better distribute incoming
# connections between worker processes.
# - `backlog=N` sets the maximum length for the queue
# of pending TCP connections. This number should
# not be too small to prevent clients
# seeing "Connection refused" errors when connecting to
# a busy Kong instance.
# **Note:** On Linux, this value is limited by the
# setting of the `net.core.somaxconn` kernel parameter.
# In order for the larger `backlog` set here to take
# effect, it is necessary to raise
# `net.core.somaxconn` at the same time to match or
# exceed the `backlog` number set.
# - `ipv6only=on|off` specifies whether an IPv6 socket listening
# on a wildcard address [::] will accept only IPv6
# connections or both IPv6 and IPv4 connections.
# - `so_keepalive=on|off|[keepidle]:[keepintvl]:[keepcnt]`
# configures the “TCP keepalive” behavior for the listening
# socket. If this parameter is omitted, the operating
# system’s settings will be in effect for the socket. If it
# is set to the value `on`, the `SO_KEEPALIVE` option is turned
# on for the socket. If it is set to the value `off`, the
# `SO_KEEPALIVE` option is turned off for the socket. Some
# operating systems support setting of TCP keepalive parameters
# on a per-socket basis using the `TCP_KEEPIDLE`, `TCP_KEEPINTVL`,
# and `TCP_KEEPCNT` socket options.
#
# This value can be set to `off`, thus disabling
# the Admin interface for this node, enabling a
# data plane mode (without configuration
# capabilities) pulling its configuration changes
# from the database.
#
# Example: `admin_listen = 127.0.0.1:8444 http2 ssl`
#status_listen = 127.0.0.1:8007 reuseport backlog=16384
# Comma-separated list of addresses and ports on
# which the Status API should listen.
# The Status API is a read-only endpoint
# allowing monitoring tools to retrieve metrics,
# healthiness, and other non-sensitive information
# of the current Kong node.
#
# The following suffix can be specified for each pair:
#
# - `ssl` will require that all connections made
# through a particular address/port be made with TLS
# enabled.
# - `http2` will allow for clients to open HTTP/2
# connections to Kong's Status API server.
# - `proxy_protocol` will enable usage of the PROXY protocol.
#
# This value can be set to `off`, disabling
# the Status API for this node.
#
# Example: `status_listen = 0.0.0.0:8100 ssl http2`
#nginx_user = kong kong # Defines user and group credentials used by
# worker processes. If group is omitted, a
# group whose name equals that of user is
# used.
#
# Example: `nginx_user = nginx www`
#
# **Note**: If the `kong` user and the `kong`
# group are not available, the default user
# and group credentials will be
# `nobody nobody`.
#nginx_worker_processes = auto # Determines the number of worker processes
# spawned by Nginx.
#
# See http://nginx.org/en/docs/ngx_core_module.html#worker_processes
# for detailed usage of the equivalent Nginx
# directive and a description of accepted
# values.
#nginx_daemon = on # Determines whether Nginx will run as a daemon
# or as a foreground process. Mainly useful
# for development or when running Kong inside
# a Docker environment.
#
# See http://nginx.org/en/docs/ngx_core_module.html#daemon.
#mem_cache_size = 128m # Size of each of the two shared memory caches
# for traditional mode database entities
# and runtime data, `kong_core_cache` and
# `kong_cache`.
#
# The accepted units are `k` and `m`, with a minimum
# recommended value of a few MBs.
#
# **Note**: As this option controls the size of two
# different cache zones, the total memory Kong
# uses to cache entities might be double this value.
# The created zones are shared by all worker
# processes and do not become larger when more
# workers are used.
#ssl_cipher_suite = intermediate # Defines the TLS ciphers served by Nginx.
# Accepted values are `modern`,
# `intermediate`, `old`, `fips` or `custom`.
# If you want to enable TLSv1.1, this value has to be `old`.
#
# See https://wiki.mozilla.org/Security/Server_Side_TLS
# for detailed descriptions of each cipher
# suite. `fips` cipher suites are as described in
# https://wiki.openssl.org/index.php/FIPS_mode_and_TLS.
#ssl_ciphers = # Defines a custom list of TLS ciphers to be
# served by Nginx. This list must conform to
# the pattern defined by `openssl ciphers`.
# This value is ignored if `ssl_cipher_suite`
# is not `custom`.
# If you use DHE ciphers, you must also
# configure the `ssl_dhparam` parameter.
#ssl_protocols = TLSv1.2 TLSv1.3
# Enables the specified protocols for
# client-side connections. The set of
# supported protocol versions also depends
# on the version of OpenSSL Kong was built
# with. This value is ignored if
# `ssl_cipher_suite` is not `custom`.
# If you want to enable TLSv1.1, you should
# set `ssl_cipher_suite` to `old`.
#
# See http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_protocols
#ssl_prefer_server_ciphers = on # Specifies that server ciphers should be
# preferred over client ciphers when using
# the SSLv3 and TLS protocols. This value is
# ignored if `ssl_cipher_suite` is not `custom`.
#
# See http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_prefer_server_ciphers
#ssl_dhparam = # Defines DH parameters for DHE ciphers from the
# predefined groups: `ffdhe2048`, `ffdhe3072`,
# `ffdhe4096`, `ffdhe6144`, `ffdhe8192`,
# from the absolute path to a parameters file, or
# directly from the parameters content.
#
# This value is ignored if `ssl_cipher_suite`
# is `modern` or `intermediate`. The reason is
# that `modern` has no ciphers that need this,
# and `intermediate` uses `ffdhe2048`.
#
# See http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_dhparam
#ssl_session_tickets = on # Enables or disables session resumption through
# TLS session tickets. This has no impact when
# used with TLSv1.3.
#
# Kong enables this by default for performance
# reasons, but it has security implications:
# https://github.com/mozilla/server-side-tls/issues/135
#
# See http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_session_tickets
#ssl_session_timeout = 1d # Specifies a time during which a client may
# reuse the session parameters. See the rationale:
# https://github.com/mozilla/server-side-tls/issues/198
#
# See http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_session_timeout
#ssl_session_cache_size = 10m # Sets the size of the caches that store session parameters.
#
# See https://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_session_cache
#ssl_cert = # Comma-separated list of certificates for `proxy_listen` values with TLS enabled.
#
# If more than one certificate is specified, it can be used to provide
# alternate types of certificates (for example, ECC certificates) that will be served
# to clients that support them. Note that to properly serve using ECC certificates,
# it is recommended to also set `ssl_cipher_suite` to
# `modern` or `intermediate`.
#
# Unless this option is explicitly set, Kong will auto-generate
# a pair of default certificates (RSA + ECC) the first time it starts up and use
# them for serving TLS requests.
#
# Certificates can be configured on this property with any of the following
# values:
# - absolute path to the certificate
# - certificate content
# - base64 encoded certificate content
#ssl_cert_key = # Comma-separated list of keys for `proxy_listen` values with TLS enabled.
#
# If more than one certificate was specified for `ssl_cert`, then this
# option should contain the corresponding key for all certificates
# provided in the same order.
#
# Unless this option is explicitly set, Kong will auto-generate
# a pair of default private keys (RSA + ECC) the first time it starts up and use
# them for serving TLS requests.
#
# Keys can be configured on this property with any of the following
# values:
# - absolute path to the certificate key
# - certificate key content
# - base64 encoded certificate key content
#client_ssl = off # Determines if Nginx should attempt to send client-side
# TLS certificates and perform Mutual TLS Authentication
# with upstream service when proxying requests.
#client_ssl_cert = # If `client_ssl` is enabled, the client certificate
# for the `proxy_ssl_certificate` directive.
#
# This value can be overwritten dynamically with the `client_certificate`
# attribute of the `Service` object.
#
# The certificate can be configured on this property with any of the following
# values:
# - absolute path to the certificate
# - certificate content
# - base64 encoded certificate content
#client_ssl_cert_key = # If `client_ssl` is enabled, the client TLS key
# for the `proxy_ssl_certificate_key` directive.
#
# This value can be overwritten dynamically with the `client_certificate`
# attribute of the `Service` object.
#
# The certificate key can be configured on this property with any of the following
# values:
# - absolute path to the certificate key
# - certificate key content
# - base64 encoded certificate key content
#admin_ssl_cert = # Comma-separated list of certificates for `admin_listen` values with TLS enabled.
#
# See docs for `ssl_cert` for detailed usage.
#admin_ssl_cert_key = # Comma-separated list of keys for `admin_listen` values with TLS enabled.
#
# See docs for `ssl_cert_key` for detailed usage.
#status_ssl_cert = # Comma-separated list of certificates for `status_listen` values with TLS enabled.
#
# See docs for `ssl_cert` for detailed usage.
#status_ssl_cert_key = # Comma-separated list of keys for `status_listen` values with TLS enabled.
#
# See docs for `ssl_cert_key` for detailed usage.
#debug_ssl_cert = # Comma-separated list of certificates for `debug_listen` values with TLS enabled.
#
# See docs for `ssl_cert` for detailed usage.
#debug_ssl_cert_key = # Comma-separated list of keys for `debug_listen` values with TLS enabled.
#
# See docs for `ssl_cert_key` for detailed usage.
#headers = server_tokens, latency_tokens, X-Kong-Request-Id
# Comma-separated list of headers Kong should
# inject in client responses.
#
# Accepted values are:
# - `Server`: Injects `Server: kong/x.y.z`
# on Kong-produced responses (e.g., Admin
# API, rejected requests from auth plugin).
# - `Via`: Injects `Via: kong/x.y.z` for
# successfully proxied requests.
# - `X-Kong-Proxy-Latency`: Time taken
# (in milliseconds) by Kong to process
# a request and run all plugins before
# proxying the request upstream.
# - `X-Kong-Response-Latency`: Time taken
# (in milliseconds) by Kong to produce
# a response in case of, e.g., a plugin
# short-circuiting the request, or in
# case of an error.
# - `X-Kong-Upstream-Latency`: Time taken
# (in milliseconds) by the upstream
# service to send response headers.
# - `X-Kong-Admin-Latency`: Time taken
# (in milliseconds) by Kong to process
# an Admin API request.
# - `X-Kong-Upstream-Status`: The HTTP status
# code returned by the upstream service.
# This is particularly useful for clients to
# distinguish upstream statuses if the
# response is rewritten by a plugin.
# - `X-Kong-Request-Id`: Unique identifier of
# the request.
# - `server_tokens`: Same as specifying both
# `Server` and `Via`.
# - `latency_tokens`: Same as specifying
# `X-Kong-Proxy-Latency`,
# `X-Kong-Response-Latency`,
# `X-Kong-Admin-Latency`, and
# `X-Kong-Upstream-Latency`.
#
# In addition to these, this value can be set
# to `off`, which prevents Kong from injecting
# any of the above headers. Note that this
# does not prevent plugins from injecting
# headers of their own.
#
# Example: `headers = via, latency_tokens`
#headers_upstream = X-Kong-Request-Id
# Comma-separated list of headers Kong should
# inject in requests to upstream.
#
# At this time, the only accepted value is:
# - `X-Kong-Request-Id`: Unique identifier of
# the request.
#
# In addition, this value can be set
# to `off`, which prevents Kong from injecting
# the above header. Note that this
# does not prevent plugins from injecting
# headers of their own.
#trusted_ips = # Defines trusted IP address blocks that are
# known to send correct `X-Forwarded-*`
# headers.
# Requests from trusted IPs make Kong forward
# their `X-Forwarded-*` headers upstream.
# Non-trusted requests make Kong insert its
# own `X-Forwarded-*` headers.
#
# This property also sets the
# `set_real_ip_from` directive(s) in the Nginx
# configuration. It accepts the same type of
# values (CIDR blocks) but as a
# comma-separated list.
#
# To trust *all* IPs, set this value to
# `0.0.0.0/0,::/0`.
#
# If the special value `unix:` is specified,
# all UNIX-domain sockets will be trusted.
#
# See http://nginx.org/en/docs/http/ngx_http_realip_module.html#set_real_ip_from
# for examples of accepted values.
#real_ip_header = X-Real-IP # Defines the request header field whose value
# will be used to replace the client address.
# This value sets the `ngx_http_realip_module`
# directive of the same name in the Nginx
# configuration.
#
# If this value receives `proxy_protocol`:
#
# - at least one of the `proxy_listen` entries
# must have the `proxy_protocol` flag
# enabled.
# - the `proxy_protocol` parameter will be
# appended to the `listen` directive of the
# Nginx template.
#
# See http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_header
# for a description of this directive.
#real_ip_recursive = off # This value sets the `ngx_http_realip_module`
# directive of the same name in the Nginx
# configuration.
#
# See http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_recursive
# for a description of this directive.
#error_default_type = text/plain # Default MIME type to use when the request
# `Accept` header is missing and Nginx
# is returning an error for the request.
# Accepted values are `text/plain`,
# `text/html`, `application/json`, and
# `application/xml`.
#upstream_keepalive_pool_size = 512 # Sets the default size of the upstream
# keepalive connection pools.
# Upstream keepalive connection pools
# are segmented by the `dst ip/dst
# port/SNI` attributes of a connection.
# A value of `0` will disable upstream
# keepalive connections by default, forcing
# each upstream request to open a new
# connection.
#upstream_keepalive_max_requests = 10000 # Sets the default maximum number of
# requests that can be proxied upstream
# through one keepalive connection.
# After the maximum number of requests
# is reached, the connection will be
# closed.
# A value of `0` will disable this
# behavior, and a keepalive connection
# can be used to proxy an indefinite
# number of requests.
#upstream_keepalive_idle_timeout = 60 # Sets the default timeout (in seconds)
# for which an upstream keepalive
# connection should be kept open. When
# the timeout is reached while the
# connection has not been reused, it
# will be closed.
# A value of `0` will disable this
# behavior, and an idle keepalive
# connection may be kept open
# indefinitely.
#allow_debug_header = off # Enable the `Kong-Debug` header function.
# If it is `on`, Kong will add
# `Kong-Route-Id`, `Kong-Route-Name`, `Kong-Service-Id`,
# and `Kong-Service-Name` debug headers to the response when
# the client request header `Kong-Debug: 1` is present.
#------------------------------------------------------------------------------
# NGINX injected directives
#------------------------------------------------------------------------------
# Nginx directives can be dynamically injected in the runtime nginx.conf file
# without requiring a custom Nginx configuration template.
#
# All configuration properties following the naming scheme
# `nginx_<namespace>_<directive>` will result in `<directive>` being injected in
# the Nginx configuration block corresponding to the property's `<namespace>`.
# Example:
# `nginx_proxy_large_client_header_buffers = 8 24k`
#
# Will inject the following directive in Kong's proxy `server {}` block:
#
# `large_client_header_buffers 8 24k;`
#
# The following namespaces are supported:
#
# - `nginx_main_<directive>`: Injects `<directive>` in Kong's configuration
# `main` context.
# - `nginx_events_<directive>`: Injects `<directive>` in Kong's `events {}`
# block.
# - `nginx_http_<directive>`: Injects `<directive>` in Kong's `http {}` block.
# - `nginx_proxy_<directive>`: Injects `<directive>` in Kong's proxy
# `server {}` block.
# - `nginx_location_<directive>`: Injects `<directive>` in Kong's proxy `/`
# location block (nested under Kong's proxy `server {}` block).
# - `nginx_upstream_<directive>`: Injects `<directive>` in Kong's proxy
# `upstream {}` block.
# - `nginx_admin_<directive>`: Injects `<directive>` in Kong's Admin API
# `server {}` block.
# - `nginx_status_<directive>`: Injects `<directive>` in Kong's Status API
# `server {}` block (only effective if `status_listen` is enabled).
# - `nginx_debug_<directive>`: Injects `<directive>` in Kong's Debug API
# `server{}` block (only effective if `debug_listen` or `debug_listen_local`
# is enabled).
# - `nginx_stream_<directive>`: Injects `<directive>` in Kong's stream module
# `stream {}` block (only effective if `stream_listen` is enabled).
# - `nginx_sproxy_<directive>`: Injects `<directive>` in Kong's stream module
# `server {}` block (only effective if `stream_listen` is enabled).
# - `nginx_supstream_<directive>`: Injects `<directive>` in Kong's stream
# module `upstream {}` block.
#
# As with other configuration properties, Nginx directives can be injected via
# environment variables when capitalized and prefixed with `KONG_`.
# Example:
# `KONG_NGINX_HTTP_SSL_PROTOCOLS` -> `nginx_http_ssl_protocols`
#
# Will inject the following directive in Kong's `http {}` block:
#
# `ssl_protocols <value>;`
#
# If different sets of protocols are desired between the proxy and Admin API
# server, you may specify `nginx_proxy_ssl_protocols` and/or
# `nginx_admin_ssl_protocols`, both of which take precedence over the
# `http {}` block.
#nginx_main_worker_rlimit_nofile = auto
# Changes the limit on the maximum number of open files
# for worker processes.
#
# The special and default value of `auto` sets this
# value to `ulimit -n` with the upper bound limited to
# 16384 as a measure to protect against excess memory use,
# and the lower bound of 1024 as a good default.
#
# See http://nginx.org/en/docs/ngx_core_module.html#worker_rlimit_nofile
#nginx_events_worker_connections = auto
# Sets the maximum number of simultaneous
# connections that can be opened by a worker process.
#
# The special and default value of `auto` sets this
# value to `ulimit -n` with the upper bound limited to
# 16384 as a measure to protect against excess memory use,
# and the lower bound of 1024 as a good default.
#
# See http://nginx.org/en/docs/ngx_core_module.html#worker_connections
#nginx_http_client_header_buffer_size = 1k # Sets buffer size for reading the
# client request headers.
# See http://nginx.org/en/docs/http/ngx_http_core_module.html#client_header_buffer_size
#nginx_http_large_client_header_buffers = 4 8k # Sets the maximum number and
# size of buffers used for
# reading large client
# request headers.
# See http://nginx.org/en/docs/http/ngx_http_core_module.html#large_client_header_buffers
#nginx_http_client_max_body_size = 0 # Defines the maximum request body size
# allowed by requests proxied by Kong,
# specified in the Content-Length request
# header. If a request exceeds this
# limit, Kong will respond with a 413
# (Request Entity Too Large). Setting
# this value to 0 disables checking the
# request body size.
# See http://nginx.org/en/docs/http/ngx_http_core_module.html#client_max_body_size
#nginx_admin_client_max_body_size = 10m # Defines the maximum request body size for
# Admin API.
#nginx_http_charset = UTF-8 # Adds the specified charset to the “Content-Type”
# response header field. If this charset is different
# from the charset specified in the `source_charset`
# directive, a conversion is performed.
#
# The parameter `off` cancels the addition of
# charset to the “Content-Type” response header field.
# See http://nginx.org/en/docs/http/ngx_http_charset_module.html#charset
#nginx_http_client_body_buffer_size = 8k # Defines the buffer size for reading
# the request body. If the client
# request body is larger than this
# value, the body will be buffered to
# disk. Note that when the body is
# buffered to disk, Kong plugins that
# access or manipulate the request
# body may not work, so it is
# advisable to set this value as high
# as possible (e.g., set it as high
# as `client_max_body_size` to force
# request bodies to be kept in
# memory). Do note that
# high-concurrency environments will
# require significant memory
# allocations to process many
# concurrent large request bodies.
# See http://nginx.org/en/docs/http/ngx_http_core_module.html#client_body_buffer_size
#nginx_admin_client_body_buffer_size = 10m # Defines the buffer size for reading
# the request body on Admin API.
#nginx_http_lua_regex_match_limit = 100000 # Global `MATCH_LIMIT` for PCRE
# regex matching. The default of `100000` should ensure
# at worst any regex Kong executes could finish within
# roughly 2 seconds.
#nginx_http_lua_regex_cache_max_entries = 8192 # Specifies the maximum number of entries allowed
# in the worker process level PCRE JIT compiled regex cache.
# It is recommended to set it to at least (number of regex paths * 2)
# to avoid high CPU usages if you manually specified `router_flavor` to
# `traditional`. `expressions` and `traditional_compat` router do
# not make use of the PCRE library and their behavior
# is unaffected by this setting.
#nginx_http_keepalive_requests = 10000 # Sets the maximum number of client requests that can be served through one
# keep-alive connection. After the maximum number of requests are made,
# the connection is closed.
# Closing connections periodically is necessary to free per-connection
# memory allocations. Therefore, using too high a maximum number of requests
# could result in excessive memory usage and is not recommended.
# See: https://nginx.org/en/docs/http/ngx_http_core_module.html#keepalive_requests
#------------------------------------------------------------------------------
# DATASTORE
#------------------------------------------------------------------------------
# Kong can run with a database to store coordinated data between Kong nodes in
# a cluster, or without a database, where each node stores its information
# independently in memory.
#
# When using a database, Kong will store data for all its entities (such as
# routes, services, consumers, and plugins) in PostgreSQL,
# and all Kong nodes belonging to the same cluster must connect to the same database.
#
# Kong supports PostgreSQL versions 9.5 and above.
#
# When not using a database, Kong is said to be in "DB-less mode": it will keep
# its entities in memory, and each node needs to have this data entered via a
# declarative configuration file, which can be specified through the
# `declarative_config` property, or via the Admin API using the `/config`
# endpoint.
#
# When using Postgres as the backend storage, you can optionally enable Kong
# to serve read queries from a separate database instance.
# When the number of proxies is large, this can greatly reduce the load
# on the main Postgres instance and achieve better scalability. It may also
# reduce the latency jitter if the Kong proxy node's latency to the main
# Postgres instance is high.
#
# The read-only Postgres instance only serves read queries, and write
# queries still go to the main connection. The read-only Postgres instance
# can be eventually consistent while replicating changes from the main
# instance.
#
# At least the `pg_ro_host` config is needed to enable this feature.
# By default, all other database config for the read-only connection is
# inherited from the corresponding main connection config described above but
# may be optionally overwritten explicitly using the `pg_ro_*` config below.
#database = postgres # Determines the database (or no database) for
# this node
# Accepted values are `postgres` and `off`.
#pg_host = 127.0.0.1 # Host of the Postgres server.
#pg_port = 5432 # Port of the Postgres server.
#pg_timeout = 5000 # Defines the timeout (in ms), for connecting,
# reading and writing.
#pg_user = kong # Postgres user.
#pg_password = # Postgres user's password.
#pg_database = kong # The database name to connect to.
#pg_schema = # The database schema to use. If unspecified,
# Kong will respect the `search_path` value of
# your PostgreSQL instance.
#pg_ssl = off # Toggles client-server TLS connections
# between Kong and PostgreSQL.
# Because PostgreSQL uses the same port for TLS
# and non-TLS, this is only a hint. If the
# server does not support TLS, the established
# connection will be a plain one.
#pg_ssl_verify = off # Toggles server certificate verification if
# `pg_ssl` is enabled.
# See the `lua_ssl_trusted_certificate`
# setting to specify a certificate authority.
#pg_max_concurrent_queries = 0 # Sets the maximum number of concurrent queries
# that can be executing at any given time. This
# limit is enforced per worker process; the
# total number of concurrent queries for this
# node will be will be:
# `pg_max_concurrent_queries * nginx_worker_processes`.
#
# The default value of 0 removes this
# concurrency limitation.
#pg_semaphore_timeout = 60000 # Defines the timeout (in ms) after which
# PostgreSQL query semaphore resource
# acquisition attempts will fail. Such
# failures will generally result in the
# associated proxy or Admin API request
# failing with an HTTP 500 status code.
# Detailed discussion of this behavior is
# available in the online documentation.
#pg_keepalive_timeout = # Specify the maximal idle timeout (in ms)
# for the postgres connections in the pool.
# If this value is set to 0 then the timeout interval
# is unlimited.
#
# If not specified this value will be same as
# `lua_socket_keepalive_timeout`
#pg_pool_size = # Specifies the size limit (in terms of connection
# count) for the Postgres server.
# Note that this connection pool is intended
# per Nginx worker rather than per Kong instance.
#
# If not specified, the default value is the same as
# `lua_socket_pool_size`
#pg_backlog = # If specified, this value will limit the total
# number of open connections to the Postgres
# server to `pg_pool_size`. If the connection
# pool is full, subsequent connect operations
# will be inserted in a queue with size equal
# to this option's value.
#
# If the number of queued connect operations
# reaches `pg_backlog`, exceeding connections will fail.
#
# If not specified, then number of open connections
# to the Postgres server is not limited.
#pg_ro_host = # Same as `pg_host`, but for the
# read-only connection.
# **Note:** Refer to the documentation
# section above for detailed usage.
#pg_ro_port = <pg_port> # Same as `pg_port`, but for the
# read-only connection.
#pg_ro_timeout = <pg_timeout> # Same as `pg_timeout`, but for the
# read-only connection.
#pg_ro_user = <pg_user> # Same as `pg_user`, but for the
# read-only connection.
#pg_ro_password = <pg_password> # Same as `pg_password`, but for the
# read-only connection.
#pg_ro_database = <pg_database> # Same as `pg_database`, but for the
# read-only connection.
#pg_ro_schema = <pg_schema> # Same as `pg_schema`, but for the
# read-only connection.
#pg_ro_ssl = <pg_ssl> # Same as `pg_ssl`, but for the
# read-only connection.
#pg_ro_ssl_verify = <pg_ssl_verify>
# Same as `pg_ssl_verify`, but for the
# read-only connection.
#pg_ro_max_concurrent_queries = <pg_max_concurrent_queries>
# Same as `pg_max_concurrent_queries`, but for
# the read-only connection.
# Note: read-only concurrency is not shared
# with the main (read-write) connection.
#pg_ro_semaphore_timeout = <pg_semaphore_timeout>
# Same as `pg_semaphore_timeout`, but for the
# read-only connection.
#pg_ro_keepalive_timeout = <pg_keepalive_timeout>
# Same as `pg_keepalive_timeout`, but for the
# read-only connection.
#pg_ro_pool_size = <pg_pool_size>
# Same as `pg_pool_size`, but for the
# read-only connection.
#pg_ro_backlog = <pg_backlog>
# Same as `pg_backlog`, but for the
# read-only connection.
#declarative_config = # The path to the declarative configuration
# file which holds the specification of all
# entities (routes, services, consumers, etc.)
# to be used when the `database` is set to
# `off`.
#
# Entities are stored in Kong's LMDB cache,
# so you must ensure that enough headroom is
# allocated to it via the `lmdb_map_size`
# property.
#
# If the hybrid mode `role` is set to `data_plane`
# and there's no configuration cache file,
# this configuration is used before connecting
# to the control plane node as a user-controlled
# fallback.
#declarative_config_string = # The declarative configuration as a string
#lmdb_environment_path = dbless.lmdb # Directory where the LMDB database files used by
# DB-less and hybrid mode to store Kong
# configurations reside.
#
# This path is relative under the Kong `prefix`.
#lmdb_map_size = 2048m # Maximum size of the LMDB memory map, used to store the
# DB-less and hybrid mode configurations. Default is 2048m.
#
# This config defines the limit of LMDB file size; the
# actual file size growth will be on-demand and
# proportional to the actual config size.
#
# Note this value can be set very large, say a couple of GBs,
# to accommodate future database growth and
# Multi-Version Concurrency Control (MVCC) headroom needs.
# The file size of the LMDB database file should stabilize
# after a few config reloads/hybrid mode syncs, and the actual
# memory used by the LMDB database will be smaller than
# the file size due to dynamic swapping of database pages by
# the OS.
#------------------------------------------------------------------------------
# DATASTORE CACHE
#------------------------------------------------------------------------------
# In order to avoid unnecessary communication with the datastore, Kong caches
# entities (such as APIs, consumers, credentials...) for a configurable period
# of time. It also handles invalidations if such an entity is updated.
#
# This section allows for configuring the behavior of Kong regarding the
# caching of such configuration entities.
#db_update_frequency = 5 # Frequency (in seconds) at which to check for
# updated entities with the datastore.
#
# When a node creates, updates, or deletes an
# entity via the Admin API, other nodes need
# to wait for the next poll (configured by
# this value) to eventually purge the old
# cached entity and start using the new one.
#db_update_propagation = 0 # Time (in seconds) taken for an entity in the
# datastore to be propagated to replica nodes
# of another datacenter.
#
# When set, this property will increase the
# time taken by Kong to propagate the change
# of an entity.
#
# Single-datacenter setups or PostgreSQL
# servers should suffer no such delays, and
# this value can be safely set to 0.
# Postgres setups with read replicas should
# set this value to the maximum expected replication
# lag between the writer and reader instances.
#db_cache_ttl = 0 # Time-to-live (in seconds) of an entity from
# the datastore when cached by this node.
#
# Database misses (no entity) are also cached
# according to this setting if you do not
# configure `db_cache_neg_ttl`.
#
# If set to 0 (default), such cached entities
# or misses never expire.
#db_cache_neg_ttl = # Time-to-live (in seconds) of a datastore
# miss (no entity).
#
# If not specified (default), `db_cache_ttl`
# value will be used instead.
#
# If set to 0, misses will never expire.
#db_resurrect_ttl = 30 # Time (in seconds) for which stale entities
# from the datastore should be resurrected
# when they cannot be refreshed (e.g., the
# datastore is unreachable). When this TTL
# expires, a new attempt to refresh the stale
# entities will be made.
#db_cache_warmup_entities = services
# Entities to be pre-loaded from the datastore
# into the in-memory cache at Kong start-up.
# This speeds up the first access of endpoints
# that use the given entities.
#
# When the `services` entity is configured
# for warmup, the DNS entries for values in
# its `host` attribute are pre-resolved
# asynchronously as well.
#
# Cache size set in `mem_cache_size` should
# be set to a value large enough to hold all
# instances of the specified entities.
# If the size is insufficient, Kong will log
# a warning.
#------------------------------------------------------------------------------
# DNS RESOLVER
#------------------------------------------------------------------------------
# By default, the DNS resolver will use the standard configuration files
# `/etc/hosts` and `/etc/resolv.conf`. The settings in the latter file will be
# overridden by the environment variables `LOCALDOMAIN` and `RES_OPTIONS` if
# they have been set.
#
# Kong will resolve hostnames as either `SRV` or `A` records (in that order, and
# `CNAME` records will be dereferenced in the process).
# In case a name is resolved as an `SRV` record, it will also override any given
# port number with the `port` field contents received from the DNS server.
#
# The DNS options `SEARCH` and `NDOTS` (from the `/etc/resolv.conf` file) will
# be used to expand short names to fully qualified ones. So it will first try
# the entire `SEARCH` list for the `SRV` type, if that fails it will try the
# `SEARCH` list for `A`, etc.
#
# For the duration of the `ttl`, the internal DNS resolver will load balance each
# request it gets over the entries in the DNS record. For `SRV` records, the
# `weight` fields will be honored, but it will only use the lowest `priority`
# field entries in the record.
#dns_resolver = # Comma-separated list of nameservers, each
# entry in `ip[:port]` format to be used by
# Kong. If not specified, the nameservers in
# the local `resolv.conf` file will be used.
# Port defaults to 53 if omitted. Accepts
# both IPv4 and IPv6 addresses.
#dns_hostsfile = /etc/hosts # The hosts file to use. This file is read
# once and its content is static in memory.
# To read the file again after modifying it,
# Kong must be reloaded.
#dns_order = LAST,SRV,A,CNAME # The order in which to resolve different
# record types. The `LAST` type means the
# type of the last successful lookup (for the
# specified name). The format is a (case
# insensitive) comma-separated list.
#dns_valid_ttl = # By default, DNS records are cached using
# the TTL value of a response. If this
# property receives a value (in seconds), it
# will override the TTL for all records.
#dns_stale_ttl = 3600 # Defines, in seconds, how long a record will
# remain in cache past its TTL. This value
# will be used while the new DNS record is
# fetched in the background.
# Stale data will be used from expiry of a
# record until either the refresh query
# completes, or the `dns_stale_ttl` number of
# seconds have passed.
# This configuration enables Kong to be more
# resilient during resolver downtime.
#dns_cache_size = 10000 # Defines the maximum allowed number of
# DNS records stored in memory cache.
# Least recently used DNS records are discarded
# from cache if it is full. Both errors and
# data are cached; therefore, a single name query
# can easily take up 10-15 slots.
#dns_not_found_ttl = 30 # TTL in seconds for empty DNS responses and
# "(3) name error" responses.
#dns_error_ttl = 1 # TTL in seconds for error responses.
#dns_no_sync = off # If enabled, then upon a cache-miss every
# request will trigger its own DNS query.
# When disabled, multiple requests for the
# same name/type will be synchronized to a
# single query.
#------------------------------------------------------------------------------
# New DNS RESOLVER
#------------------------------------------------------------------------------
# This DNS resolver introduces global caching for DNS records across workers,
# significantly reducing the query load on DNS servers.
#
# It provides observable statistics, you can retrieve them through the Admin API
# `/status/dns`.
#new_dns_client = off # Enable or disable the new DNS resolver
#resolver_address = <name servers parsed from resolv.conf>
# Comma-separated list of nameservers, each
# entry in `ip[:port]` format to be used by
# Kong. If not specified, the nameservers in
# the local `resolv.conf` file will be used.
# Port defaults to 53 if omitted. Accepts
# both IPv4 and IPv6 addresses.
#
# Examples:
#
# ```
# resolver_address = 8.8.8.8
# resolver_address = 8.8.8.8, [::1]
# resolver_address = 8.8.8.8:53, [::1]:53
# ```
#resolver_hosts_file = /etc/hosts
# The hosts file to use. This file is read
# once and its content is static in memory.
# To read the file again after modifying it,
# Kong must be reloaded.
#resolver_family = A,SRV # The supported query types.
#
# For a domain name, Kong will only query
# either IP addresses (A or AAAA) or SRV
# records, but not both.
#
# It will query SRV records only when the
# domain matches the
# "_<proto>._<service>.<name>" format, for
# example, "_ldap._tcp.example.com".
#
# For IP addresses (A or AAAA) resolution, it
# first attempts IPv4 (A) and then queries
# IPv6 (AAAA).
#resolver_valid_ttl = <TTL from responses>
# By default, DNS records are cached using
# the TTL value of a response. This optional
# parameter (in seconds) allows overriding it.
#resolver_error_ttl = 1 # TTL in seconds for error responses and empty
# responses.
#resolver_stale_ttl = 3600 # Defines, in seconds, how long a record will
# remain in cache past its TTL. This value
# will be used while the new DNS record is
# fetched in the background.
#
# Stale data will be used from expiry of a
# record until either the refresh query
# completes, or the `resolver_stale_ttl` number
# of seconds have passed.
#
# This configuration enables Kong to be more
# resilient during the DNS server downtime.
#resolver_lru_cache_size = 10000 # The DNS client uses a two-layer cache system:
# L1 - worker-level LRU Lua VM cache
# L2 - across-workers shared memory cache
#
# This value specifies the maximum allowed
# number of DNS responses stored in the L1 LRU
# lua VM cache.
#
# A single name query can easily take up 1~10
# slots, depending on attempted query types and
# extended domains from /etc/resolv.conf
# options `domain` or `search`.
#resolver_mem_cache_size = 5m # This value specifies the size of the L2
# shared memory cache for DNS responses,
# `kong_dns_cache`.
#
# Accepted units are `k` and `m`, with a
# minimum recommended value of a few MBs.
#
# 5MB shared memory size could store
# ~20000 DNS responeses with single A record or
# ~10000 DNS responeses with 2~3 A records.
#
# 10MB shared memory size could store
# ~40000 DNS responeses with single A record or
# ~20000 DNS responeses with 2~3 A records.
#------------------------------------------------------------------------------
# VAULTS
#------------------------------------------------------------------------------
# A secret is any sensitive piece of information required for API gateway
# operations. Secrets may be part of the core Kong Gateway configuration,
# used in plugins, or part of the configuration associated with APIs serviced
# by the gateway.
#
# Some of the most common types of secrets used by Kong Gateway include:
#
# - Data store usernames and passwords, used with PostgreSQL and Redis
# - Private X.509 certificates
# - API keys
#
# Sensitive plugin configuration fields are generally used for authentication,
# hashing, signing, or encryption. Kong Gateway lets you store certain values
# in a vault. Here are the vault specific configuration options.
#vault_env_prefix = # Defines the environment variable vault's
# default prefix. For example if you have
# all your secrets stored in environment
# variables prefixed with `SECRETS_`, it
# can be configured here so that it isn't
# necessary to repeat them in Vault
# references.
#------------------------------------------------------------------------------
# TUNING & BEHAVIOR
#------------------------------------------------------------------------------
#worker_consistency = eventual
# Defines whether this node should rebuild its
# state synchronously or asynchronously (the
# balancers and the router are rebuilt on
# updates that affect them, e.g., updates to
# routes, services, or upstreams via the admin
# API or loading a declarative configuration
# file). (This option is deprecated and will be
# removed in future releases. The new default
# is `eventual`.)
#
# Accepted values are:
#
# - `strict`: the router will be rebuilt
# synchronously, causing incoming requests to
# be delayed until the rebuild is finished.
# (This option is deprecated and will be removed
# in future releases. The new default is `eventual`)
# - `eventual`: the router will be rebuilt
# asynchronously via a recurring background
# job running every second inside of each
# worker.
#
# Note that `strict` ensures that all workers
# of a given node will always proxy requests
# with an identical router, but increased
# long-tail latency can be observed if
# frequent routes and services updates are
# expected.
# Using `eventual` will help prevent long-tail
# latency issues in such cases, but may
# cause workers to route requests differently
# for a short period of time after routes and
# services updates.
#worker_state_update_frequency = 5
# Defines how often the worker state changes are
# checked with a background job. When a change
# is detected, a new router or balancer will be
# built, as needed. Raising this value will
# decrease the load on database servers and
# result in less jitter in proxy latency, but
# it might take more time to propagate changes
# to each individual worker.
#router_flavor = traditional_compatible
# Selects the router implementation to use when
# performing request routing. Incremental router
# rebuild is available when the flavor is set
# to either `expressions` or
# `traditional_compatible`, which could
# significantly shorten rebuild time for a large
# number of routes.
#
# Accepted values are:
#
# - `traditional_compatible`: the DSL-based expression
# router engine will be used under the hood. However,
# the router config interface will be the same
# as `traditional`, and expressions are
# automatically generated at router build time.
# The `expression` field on the `route` object
# is not visible.
# - `expressions`: the DSL-based expression router engine
# will be used under the hood. The traditional router
# config interface is still visible, and you can also write
# router Expressions manually and provide them in the
# `expression` field on the `route` object.
# - `traditional`: the pre-3.0 router engine will be
# used. The config interface will be the same as
# pre-3.0 Kong, and the `expression` field on the
# `route` object is not visible.
#
# Deprecation warning: In Kong 3.0, `traditional`
# mode should be avoided and only be used if
# `traditional_compatible` does not work as expected.
# This flavor of the router will be removed in the next
# major release of Kong.
#lua_max_req_headers = 100 # Maximum number of request headers to parse by default.
#
# This argument can be set to an integer between 1 and 1000.
#
# When proxying, Kong sends all the request headers,
# and this setting does not have any effect. It is used
# to limit Kong and its plugins from reading too many
# request headers.
#lua_max_resp_headers = 100 # Maximum number of response headers to parse by default.
#
# This argument can be set to an integer between 1 and 1000.
#
# When proxying, Kong returns all the response headers,
# and this setting does not have any effect. It is used
# to limit Kong and its plugins from reading too many
# response headers.
#lua_max_uri_args = 100 # Maximum number of request URI arguments to parse by
# default.
#
# This argument can be set to an integer between 1 and 1000.
#
# When proxying, Kong sends all the request query
# arguments, and this setting does not have any effect.
# It is used to limit Kong and its plugins from reading
# too many query arguments.
#lua_max_post_args = 100 # Maximum number of request post arguments to parse by
# default.
#
# This argument can be set to an integer between 1 and 1000.
#
# When proxying, Kong sends all the request post
# arguments, and this setting does not have any effect.
# It is used to limit Kong and its plugins from reading
# too many post arguments.
#------------------------------------------------------------------------------
# MISCELLANEOUS
#------------------------------------------------------------------------------
# Additional settings inherited from lua-nginx-module allowing for more
# flexibility and advanced usage.
#
# See the lua-nginx-module documentation for more information:
# https://github.com/openresty/lua-nginx-module
#lua_ssl_trusted_certificate = system # Comma-separated list of certificate authorities
# for Lua cosockets in PEM format.
#
# The special value `system` attempts to search for the
# "usual default" provided by each distro, according
# to an arbitrary heuristic. In the current implementation,
# the following pathnames will be tested in order,
# and the first one found will be used:
#
# - `/etc/ssl/certs/ca-certificates.crt` (Debian/Ubuntu/Gentoo)
# - `/etc/pki/tls/certs/ca-bundle.crt` (Fedora/RHEL 6)
# - `/etc/ssl/ca-bundle.pem` (OpenSUSE)
# - `/etc/pki/tls/cacert.pem` (OpenELEC)
# - `/etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem` (CentOS/RHEL 7)
# - `/etc/ssl/cert.pem` (OpenBSD, Alpine)
#
# `system` can be used by itself or in conjunction with other
# CA file paths.
#
# When `pg_ssl_verify` is enabled, these
# certificate authority files will be
# used for verifying Kong's database connections.
#
# Certificates can be configured on this property
# with any of the following values:
# - `system`
# - absolute path to the certificate
# - certificate content
# - base64 encoded certificate content
#
# See https://github.com/openresty/lua-nginx-module#lua_ssl_trusted_certificate
#lua_ssl_verify_depth = 1 # Sets the verification depth in the server
# certificates chain used by Lua cosockets,
# set by `lua_ssl_trusted_certificate`.
# This includes the certificates configured
# for Kong's database connections.
# If the maximum depth is reached before
# reaching the end of the chain, verification
# will fail. This helps mitigate certificate
# based DoS attacks.
#
# See https://github.com/openresty/lua-nginx-module#lua_ssl_verify_depth
#lua_ssl_protocols = TLSv1.2 TLSv1.3 # Defines the TLS versions supported
# when handshaking with OpenResty's
# TCP cosocket APIs.
#
# This affects connections made by Lua
# code, such as connections to the
# database Kong uses, or when sending logs
# using a logging plugin. It does *not*
# affect connections made to the upstream
# Service or from downstream clients.
#lua_package_path = ./?.lua;./?/init.lua; # Sets the Lua module search path
# (LUA_PATH). Useful when developing
# or using custom plugins not stored
# in the default search path.
#
# See https://github.com/openresty/lua-nginx-module#lua_package_path
#lua_package_cpath = # Sets the Lua C module search path
# (LUA_CPATH).
#
# See https://github.com/openresty/lua-nginx-module#lua_package_cpath
#lua_socket_pool_size = 256 # Specifies the size limit for every cosocket
# connection pool associated with every remote
# server.
#
# See https://github.com/openresty/lua-nginx-module#lua_socket_pool_size
#untrusted_lua = sandbox
# Controls loading of Lua functions from admin-supplied
# sources such as the Admin API. LuaJIT bytecode
# loading is always disabled.
#
# **Warning:** LuaJIT is not designed as a secure
# runtime for running malicious code, therefore
# you should properly protect your Admin API endpoint
# even with sandboxing enabled. The sandbox only
# provides protection against trivial attackers or
# unintentional modification of the Kong global
# environment.
#
# Accepted values are: `off`, `sandbox`, or
# `on`:
#
# * `off`: Disallow loading of any arbitrary
# Lua functions. The `off` option
# disables any functionality that runs
# arbitrary Lua code, including the
# Serverless Functions plugins and any
# transformation plugin that allows
# custom Lua functions.
#
# * `sandbox`: Allow loading of Lua functions,
# but use a sandbox when executing
# them. The sandboxed function has
# restricted access to the global
# environment and only has access
# to Kong PDK, OpenResty, and
# standard Lua functions that will
# generally not cause harm to the
# Kong Gateway node.
#
# * `on`: Functions have unrestricted
# access to the global environment and
# can load any Lua modules. This is
# similar to the behavior in
# Kong Gateway prior to 2.3.0.
#
# The default `sandbox` environment does not
# allow importing other modules or libraries,
# or executing anything at the OS level (for
# example, file read/write). The global
# environment is also not accessible.
#
# Examples of `untrusted_lua = sandbox`
# behavior:
#
# * You can't access or change global values
# such as `kong.configuration.pg_password`
# * You can run harmless lua:
# `local foo = 1 + 1`. However, OS level
# functions are not allowed, like:
# `os.execute('rm -rf /*')`.
#
# To customize the sandbox environment, use
# the `untrusted_lua_sandbox_requires` and
# `untrusted_lua_sandbox_environment`
# parameters below.
#untrusted_lua_sandbox_requires = # Comma-separated list of modules allowed to
# be loaded with `require` inside the
# sandboxed environment. Ignored
# if `untrusted_lua` is not `sandbox`.
#
# For example, say you have configured the
# Serverless pre-function plugin and it
# contains the following `requires`:
#
# ```
# local template = require "resty.template"
# local split = require "kong.tools.string".split
# ```
#
# To run the plugin, add the modules to the
# allowed list:
# ```
# untrusted_lua_sandbox_requires = resty.template, kong.tools.utils
# ```
#
# **Warning:** Allowing certain modules may
# create opportunities to escape the
# sandbox. For example, allowing `os` or
# `luaposix` may be unsafe.
#untrusted_lua_sandbox_environment = # Comma-separated list of global Lua
# variables that should be made available
# inside the sandboxed environment. Ignored
# if `untrusted_lua` is not `sandbox`.
#
# **Warning**: Certain variables, when made
# available, may create opportunities to
# escape the sandbox.
#openresty_path = # Path to the OpenResty installation that Kong
# will use. When this is empty (the default),
# Kong determines the OpenResty installation
# by searching for a system-installed OpenResty
# and falling back to searching $PATH for the
# nginx binary.
#
# Setting this attribute disables the search
# behavior and explicitly instructs Kong which
# OpenResty installation to use.
#node_id = # Node ID for the Kong node. Every Kong node
# in a Kong cluster must have a unique and
# valid UUID. When empty, node ID is
# automatically generated.
#------------------------------------------------------------------------------
# KONG MANAGER
#------------------------------------------------------------------------------
#
# The Admin GUI for Kong Enterprise.
#
#admin_gui_listen = 0.0.0.0:8002, 0.0.0.0:8445 ssl
# Kong Manager Listeners
#
# Comma-separated list of addresses and ports on which
# Kong will expose Kong Manager. This web application
# lets you configure and manage Kong, and therefore
# should be kept secured.
#
# Suffixes can be specified for each pair, similarly to
# the `admin_listen` directive.
#admin_gui_url = # Kong Manager URL
#
# Comma-separated list of addresses (the lookup or balancer) for Kong Manager.
#
# Accepted format (items in square brackets are optional):
#
# `<scheme>://<IP / HOSTNAME>[:<PORT>][<PATH>][, <scheme>://<IP / HOSTNAME>[:<PORT>][<PATH>]]`
#
# Examples:
#
# - `http://127.0.0.1:8003`
# - `https://kong-admin.test`
# - `http://dev-machine`
# - `http://127.0.0.1:8003, https://exmple.com/manager`
#admin_gui_path = / # Kong Manager base path
#
# This configuration parameter allows the user to customize
# the path prefix where Kong Manager is served. When updating
# this parameter, it's recommended to update the path in `admin_gui_url`
# as well.
#
# Accepted format:
#
# - Path must start with a `/`
# - Path must not end with a `/` (except for the `/`)
# - Path can only contain letters, digits, hyphens (`-`),
# underscores (`_`), and slashes (`/`)
# - Path must not contain continuous slashes (e.g., `//` and `///`)
#
# Examples:
#
# - `/`
# - `/manager`
# - `/kong-manager`
# - `/kong/manager`
#admin_gui_api_url = # Hierarchical part of a URI which is composed
# optionally of a host, port, and path at which the
# Admin API accepts HTTP or HTTPS traffic. When
# this config is disabled, Kong Manager will
# use the window protocol + host and append the
# resolved admin_listen HTTP/HTTPS port.
#admin_gui_csp_header = off # Enable or disable the `Content-Security-Policy` (CSP) header for Kong Manager
#
# This configuration controls the presence of the
# `Content-Security-Policy` header while serving Kong Manager.
#
# Setting this configuration to `on` to enable the CSP header.
#admin_gui_ssl_cert = # The SSL certificate for `admin_gui_listen` values
# with SSL enabled.
#
# values:
# - absolute path to the certificate
# - certificate content
# - base64 encoded certificate content
#admin_gui_ssl_cert_key = # The SSL key for `admin_gui_listen` values with SSL
# enabled.
#
# values:
# - absolute path to the certificate key
# - certificate key content
# - base64 encoded certificate key content
#admin_gui_access_log = logs/admin_gui_access.log
# Kong Manager Access Logs
#
# Here you can set an absolute or relative path for Kong
# Manager access logs. When the path is relative,
# logs are placed in the `prefix` location.
#
# Setting this value to `off` disables access logs
# for Kong Manager.
#admin_gui_error_log = logs/admin_gui_error.log
# Kong Manager Error Logs
#
# Here you can set an absolute or relative path for Kong
# Manager access logs. When the path is relative,
# logs are placed in the `prefix` location.
#
# Setting this value to `off` disables error logs for
# Kong Manager.
#
# Granularity can be adjusted through the `log_level`
# directive.
#------------------------------------------------------------------------------
# WEBASSEMBLY (WASM)
#------------------------------------------------------------------------------
#wasm = off # Enable/disable wasm support. This must be enabled in
# order to use wasm filters and filter chains.
#wasm_filters_path = # Path to the directory containing wasm filter modules.
#
# At startup, Kong discovers available wasm filters by
# scanning this directory for files with the `.wasm`
# file extension.
#
# The name of a wasm filter module is derived from the
# filename itself, with the .wasm extension removed. So,
# given the following tree:
#
# ```
# /path/to/wasm_filters
# ├── my_module.wasm
# ├── my_other_module.wasm
# └── not_a_wasm_module.txt
# ```
#
# The resulting filter modules available for use in Kong
# will be:
#
# - `my_module`
# - `my_other_module`
#
# Notes:
#
# - No recursion is performed. Only .wasm files at the
# top level are registered.
# - This path _may_ be a symlink to a directory.
#wasm_filters = bundled,user # Comma-separated list of Wasm filters to be made
# available for use in filter chains.
#
# When the `off` keyword is specified as the
# only value, no filters will be available for use.
#
# When the `bundled` keyword is specified, all filters
# bundled with Kong will be available.
#
# When the `user` keyword is specified, all filters
# within the `wasm_filters_path` will be available.
#
# **Examples:**
#
# - `wasm_filters = bundled,user` enables _all_ bundled
# and user-supplied filters
# - `wasm_filters = user` enables _only_ user-supplied
# filters
# - `wasm_filters = filter-a,filter-b` enables _only_
# filters named `filter-a` or `filter-b` (whether
# bundled _or_ user-supplied)
#
# If a conflict occurs where a bundled filter and a
# user-supplied filter share the same name, a warning
# will be logged, and the user-supplied filter will
# be used instead.
#------------------------------------------------------------------------------
# WASM injected directives
#------------------------------------------------------------------------------
# The Nginx Wasm module (i.e., ngx_wasm_module) has its own settings, which can
# be tuned via `wasm_*` directives in the Nginx configuration file. Kong
# supports configuration of these directives via its Nginx directive injection
# mechanism.
#
# The following namespaces are supported:
#
# - `nginx_wasm_<directive>`: Injects `<directive>` into the `wasm {}` block.
# - `nginx_wasm_shm_kv`: Injects `shm_kv *` into the `wasm {}` block,
# allowing operators to define a general memory zone which is usable by
# the `get_shared_data`/`set_shared_data` Proxy-Wasm SDK functions as
# an in-memory key-value store of data shareable across filters.
# - `nginx_wasm_shm_kv_<name>`: Injects `shm_kv <name>` into the `wasm {}` block,
# allowing operators to define custom shared memory zones which are usable by
# the `get_shared_data`/`set_shared_data` Proxy-Wasm SDK functions as
# separate namespaces in the `"<name>/<key>"` format.
# For using these functions with non-namespaced keys, the Nginx template needs
# a `shm_kv *` entry, which can be defined using `nginx_wasm_shm_kv`.
# - `nginx_wasm_wasmtime_<flag>`: Injects `flag <flag>` into the `wasmtime {}`
# block, allowing various Wasmtime-specific flags to be set.
# - `nginx_<http|proxy>_<directive>`: Injects `<directive>` into the
# `http {}` or `server {}` blocks, as specified in the Nginx injected directives
# section.
#
# The documentation for all supported directives can be found in the Nginx Wasm
# module repository:
#
# https://github.com/Kong/ngx_wasm_module/blob/main/docs/DIRECTIVES.md
#
# The Wasmtime flag documentation can be found here:
#
# https://docs.wasmtime.dev/c-api/config_8h.html
#
# There are several noteworthy ngx_wasm_module behaviors which can be tuned via
# `http {}`/`server {}` level directive injection (identical behavior in either
# level), for example:
#
# - `nginx_http_proxy_wasm_socket_<connect|read|send>_timeout`: sets connection/read/send
# timeouts for Wasm dispatches.
# - `nginx_http_proxy_wasm_socket_buffer_size`: sets a buffer size for
# reading Wasm dispatch responses.
#
# The values for these settings are inherited from their `nginx_*_lua_*`
# counterparts if they have not been explicitly set. For instance, if you set
# `nginx_http_lua_socket_connect_timeout`, the value
# of this setting will be propagated to `nginx_http_wasm_socket_connect_timeout`
# unless you _also_ set `nginx_http_wasm_socket_connect_timeout`.
#
# Some TLS-related settings receive special treatment as well:
#
# - `lua_ssl_trusted_certificate`: when set, the value is propagated to the
# `nginx_wasm_tls_trusted_certificate` directive.
# - `lua_ssl_verify_depth`: when set (to a value greater than zero), several
# TLS-related `nginx_wasm_*` settings are enabled:
# - `nginx_wasm_tls_verify_cert`
# - `nginx_wasm_tls_verify_host`
# - `nginx_wasm_tls_no_verify_warn`
#
# Like other `kong.conf` fields, all injected Nginx directives documented here
# can be set via environment variable. For instance, setting:
#
# `KONG_NGINX_WASM_TLS_VERIFY_CERT=<value>`
#
# Will inject the following into the `wasm {}` block:
#
# `tls_verify_cert <value>;`
#
# There are several Nginx directives supported by ngx_wasm_module which should
# not be used because they are irrelevant to or unsupported by Kong, or they may
# conflict with Kong's own management of Proxy-Wasm. Use of these directives may
# result in unintentional breakage:
#
# - `wasm_call`
# - `module`
# - `proxy_wasm`
# - `resolver_add`
# - `proxy_wasm_request_headers_in_access`
# - `shm_queue`
#-------------------------------------------------------------------------------
# REQUEST DEBUGGING
#-------------------------------------------------------------------------------
# Request debugging is a mechanism that allows admins to collect the timing of
# proxy path requests in the response header (X-Kong-Request-Debug-Output)
# and optionally, the error log.
#
# This feature provides insights into the time spent within various components of Kong,
# such as plugins, DNS resolution, load balancing, and more. It also provides contextual
# information such as domain names tried during these processes.
#
#request_debug = on # When enabled, Kong will provide detailed timing information
# for its components to the client and the error log
# if the following headers are present in the proxy request:
# - `X-Kong-Request-Debug`:
# If the value is set to `*`,
# timing information will be collected and exported for the current request.
# If this header is not present or contains an unknown value,
# timing information will not be collected for the current request.
# You can also specify a list of filters, separated by commas,
# to filter the scope of the time information that is collected.
# The following filters are supported for `X-Kong-Request-Debug`:
# - `rewrite`: Collect timing information from the `rewrite` phase.
# - `access`: Collect timing information from the `access` phase.
# - `balancer`: Collect timing information from the `balancer` phase.
# - `response`: Collect timing information from the `response` phase.
# - `header_filter`: Collect timing information from the `header_filter` phase.
# - `body_filter`: Collect timing information from the `body_filter` phase.
# - `log`: Collect timing information from the `log` phase.
# - `upstream`: Collect timing information from the `upstream` phase.
#
# - `X-Kong-Request-Debug-Log`:
# If set to `true`, timing information will also be logged
# in the Kong error log with a log level of `notice`.
# Defaults to `false`.
#
# - `X-Kong-Request-Debug-Token`:
# Token for authenticating the client making the debug
# request to prevent abuse.
# ** Note: Debug requests originating from loopback
# addresses do not require this header. Deploying Kong behind
# other proxies may result in exposing the debug interface to
# the public.**
#
#request_debug_token = <random> # The Request Debug Token is used in the
# `X-Kong-Request-Debug-Token` header to prevent abuse.
# If this value is not set (the default),
# a random token will be generated
# when Kong starts, restarts, or reloads. If a token is
# specified manually, then the provided token will be used.
#
# You can locate the generated debug token in two locations:
# - Kong error log:
# Debug token will be logged in the error log (notice level)
# when Kong starts, restarts, or reloads.
# The log line will have the: `[request-debug]` prefix to aid searching.
# - Filesystem:
# Debug token will also be stored in a file located at
# `{prefix}/.request_debug_token` and updated
# when Kong starts, restarts, or reloads.
在新工单中引用 查看 Git Blame 复制永久链接